Kaowool Board Ht : 2600 Deg. 1″ X 2′ X 3′

KAOWOOL BOARD HT 2600 DEGREE: 1″ X 2′ X 3′

NOTE: NOT ELIGIBLE FOR FREE/FIXED SHIPPING TO AK or HI

Thermal Ceramics high temperature vacuum formed boards are rigid and self-supporting. These products offer excellent thermal conductivity, strength and thermal stability at elevated temperatures and have the capability to withstand chemical attack. Exceptions include hydrofluoric acid, phosphoric acid and strong alkalies. A small amount of combustible binder will burn out at approximately 300F. Additional hardness and strength can be reached with post treatments. Rigid ceramic fiber board capabilities are 48 x 36 x to 3″ (120 x 90 x 0.625 to 7.5cm).

Kaowool HT is a low cost high temperature product designed for use up to 2600F (1427C). Kaowool HT is a rigid self-supporting product.

Kaowool Board Applications:

• Appliance and heat processing
• Backup insulation to dense refractories
• Bullnose tiles
• Burner blocks
• Combustion chamber construction
• Expansion joint material
• Flue and chimney linings
• Furnace components
• Furnace door linings
• Furnace, kiln, and oven hot face linings
• Glass regenerator insulation
• Heat shields
• High temperature gaskets and seals
• Peep door frames and plugs
• Shapes in ammonia reformers

Chemical Properties

Caution should be exercised during initial heating. Adequate ventilation should be provided to avoid potential flash ignition of the binder out-gassing or avoid air entry while at elevated temperatures.