50% OFF! Hot items selling fast—Grab them before they're gone!
Unconditional Satisfaction GuaranteeNo Shipping Fees Above 302 Months to Decide. Returns Simplified.The HF 810 is designed for china painting and all clays up to 2300F (1260C), cone 8. Its small size and120V operation make it perfect for the casual and private studio.The HF 810 is automatically controlled using our TAP Touchscreen, Genesis Touchscreen, RampmasterII or Set-Pro controls. Each is designed for easy programming and excellent firing results. Order yourswith our Quiet Drive Solid State output option for tight temperature control and longer element life.
The HF 810 is a top loading design and offers a chamber 11.25″ diameter x 9″ deep. The HF 810 is built with 3″ firebrick allowing it to reach temperature easier.
We love handles. Handles have to be properly sized and shaped for the job. Our lid handles make this point by offering an 8″ handle that’s easy to grasp and operate.
These wide, corner mounted handle allows for confident and easy lifting, even with a gloved hand. It’s unlike any other and it’s a joy to use.
The HF 810 is equipped with a 2 position lid vent. Perfect for speeding up the cooling process.
The HF 810 temperature controls are fitted to our Swing View Adjustable Enclosure.
The swing view is a pivoting, swing-up enclosure that allows you to rotate the control to a comfortable viewing and programming angle. Once you’re done, lay it back down to see it from across your studio. It’s that simple.
The swing view pairs well with touchscreen controls like the TAP II, Icon+ and Icon as viewing angle can be perfectly aligned. You’ll love it.
Historically kiln designs were based on 2-1/2″ firebrick. As 3″ firebrick began to show favor in high temperature designs many kiln manufacturers simply reduced the firing chamber size to accommodate the thicker firebrick while leaving the outside dimensions the same.
At Evenheat we took a different direction. Instead of making the chamber smaller we kept it the same while increasing the outside dimensions. In this way there is no loss in chamber volume and common, standard kiln furniture would continue to fit. Nice.
Our kiln designs feature swing-away peephole covers as opposed to plugs.
Plugs get lost and they get broken. Our attached peephole covers remain on the kiln and simply swing open and closed. You won’t lose them and they certainly won’t break.
The HF 810 is provided with a lid prop bar that positively keeps the lid in the open position. Simple operation is made even easier with our well designed lid handle.
The HF 810 incorporates our Relay Access Port for simple, no-panel-off relay replacement.
Simply remove the access plate to gain access to the mechanical relays. There’s no need to remove the control panel and dig into the internal wiring. It’s absolutely simple and effective and all it takes is a screwdriver!
It’s a given that mechanical relays will fail at some point. This relay access port really comes in handy when they do.
Multi-section, multi-jacketed kilns were conceived to lower production costs for the kiln manufacturer and to make life easier for the person installing the kiln. These are worthy goals but they come at the cost of kiln quality. It’s a trade off we’re not willing to make.
We build our kilns with full stainless jackets from top to bottom. Full stainless jackets mean absolutely solid, life extending construction. There are no leaks, no shifting and no weakness. Insist on Full Stainless Jackets for true build quality.
